HomeTechnical Support

Technical Support Questions

Deleting Host Captured Line Messages in this topic - RSS

Brian
Administrator
Posts: 24


11/10/2021
Brian
Administrator
Posts: 24
So when a line is marked as "host captured," that means that the data is coming from the output that the Host Accounting System is sending to PrintBoss. Those items cannot be directly manipulated. You could try right-clicking, go to View Raw Capture, and then double click on the item and click the button to Assign to Variable and check the box marked "Blank Out After Capture." The problem with that is that if the data is falling in a place where "legitimate" data could be appearing on other checks, then it might blank out something you don't want it to.

So generally the best way to address an issue like this would be to see if you can prevent the Host Accounting System from sending the data to PrintBoss in the first place.

--
Wellspring Software
Support Technician
0 link
GSTAPLES
Posts: 1


11/10/2021
GSTAPLES
Posts: 1
Hi,
I have a form that is printing a **VOID** on stub checks before the actual check. Everything else is fine. I can go to document workfiles and edit the object and delete it but it keeps coming back. It is listed as "host captured line 212"
Is there a way to remove this object without changing everything else? I think this is a printboss standard form S4_AP3.
To further explain, the accounting system prints what it calls stub checks before the actual check when the detail lines on the check stub exceed 12 lines. So if you are paying 13 invoices from a vendor, you get two pieces of paper, a stub check marked void and a regular check. The check part of the stub check should say void but the stub part of the stub check has this weird void object. See attached.


Thank you.

Attachments:
134836.jpg
0 link






Powered by Jitbit Forum 8.3.8.0 © 2006-2013 Jitbit Software