HomeGeneral Inquiries

Any non-technical question about Wellspring Software's products and services

Double Window Envelopes Messages in this topic - RSS

Nancy
Administrator
Posts: 765


10/8/2015
Nancy
Administrator
Posts: 765
Our standard bottom checks are perforated at 4 inches and 7.5 inches from the top of the page. The top section is intended to be a copy removed from the check and middle stub which are sent to the customer. If you tear off the top section, everything should line up.
0 link
wyattcpa
Posts: 1


10/8/2015
wyattcpa
Posts: 1
I ordered the standard #9 envelope to go with the checks I ordered from Wellspring. When folded on the perforated lines, the checks do not fit in the envelopes. The three perforated sections of the checks are not equal. I have to bend part of the check to fit into the envelope. This is the only envelope option provided by Wellspring. Why do they not fit? It looks unprofessional when I mail the checks.
0 link
kgaff71
Posts: 3


6/8/2015
kgaff71
Posts: 3
Can you adjust the vendor address location on the printed checks? I bought checks from wellsprings.com but address doesn't show in correct spot
0 link
Nancy
Administrator
Posts: 765


7/31/2014
Nancy
Administrator
Posts: 765
here are the dimension for our Window Envelopes:
Standard #9 envelope

8.875” x 3.875”


Top window:
3.5” x 0.90”
From left: 0.30”
From bottom: 2.4”

Bottom window:
3.5” x 0.90”
From left: 0.875”
From bottom: 0.875”
0 link
Nancy
Administrator
Posts: 765


12/18/2012
Nancy
Administrator
Posts: 765
We do sell both a regular and self-seal window envelopes for our checks.
Please contact sales at 800-600-6861 and they can send you a sample.
0 link
Radius
Posts: 1


12/18/2012
Radius
Posts: 1
We use your standard blue/red bottom blank checks and are having trouble finding double window envelopes that meet our needs.

The check stock has a pre-printed line at the bottom that says "CHECK IS PRINTED ON SECURITY PAPER....." and we would like to have an envelope with a bottom window that is positioned to cover that line. We do not want to advertise that a check is in the envelope. This would require an envelope where the bottom of the lower window be no less than 5/8 inch from the bottom edge of the envelope (3/4 inch would be ideal).

Do any of your stock double-window envelopes meet this requirement?
0 link






Powered by Jitbit Forum 8.3.8.0 © 2006-2013 Jitbit Software